Onkyo NS-6130 User Manual English etc. - Page 12

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others USB Storage Device/HDD Playback 1 a 2 d b c e f Basic operations E You can play music files by connecting a USB storage N device or HDD (hard disk drive) to the USB port on the front or rear of the unit. 0 The USB port on the front supports a maximum 5 V/0.5 A power supply. If the HDD requires more than this, connect to the USB port (maximum 5 V/1 A) on the rear of the unit. 1. Turn the unit on. 2. Press USB to select "USB (F)" (USB port on the front panel) or "USB (R)" (USB port on the rear panel). USB ( F ) 3. Plug your USB storage device or HDD into the USB port on the front or rear. 4. Press ENTER (e) after reading is complete. 5. Select the folder or music file with / (d) on the remote controller and press ENTER (e) to confirm. To return to the previous display, press (f). 6. Use play buttons (b) to stop play or choose tracks to play. 0 The display of album name and artist name is supported with MP3/WMA/Apple Lossless/FLAC/AAC/DSD (DSF only) format music files. 0 Characters that cannot be displayed by this unit appear as "¢". 0 The USB port of this unit conforms with the USB 2.0 standard. The transfer speed may be insufficient for some content you play, which may cause some interruption in sound. Repeat play 1. Repeatedly press REPEAT (a) during play to display or on the display. : Repeat play of the selected individual track. : Repeat play of all tracks within a folder. To cancel repeat play, press REPEAT (a) several times 12