Onkyo NS-6130 User Manual English etc. - Page 25
Updating via USB
View all Onkyo NS-6130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Updating via USB 0 Prepare a 128 MB or larger USB storage device. FAT16 or FAT32 file system format. 0 Delete any data stored on the USB storage device. 0 Turn off the controller component (PC etc.) connected to the network. 0 Stop any playing Internet radio, USB storage device, or server content. 0 Some USB storage devices may take long to load, may not be loaded correctly, or may not be correctly fed depending on the device or their content. 0 We will not be liable whatsoever for any loss or damage of data, or storage failure arising from the use of the USB storage device with this unit. Thank you for your understanding. 1. Connect the USB storage device to your PC. 2. Download the firmware file from our company's website to your PC and unzip. Firmware files are named in the following way: ONKNAP zip Unzip the file on your PC. The number of unzipped files and folders varies depending on the model. 3. Copy all unzipped files and folders to the root folder of the USB storage device. 0 Make sure to copy the unzipped files. 4. Connect the USB storage device to the USB port of this unit. 0 If you connect a USB hard disk drive to the USB port of the unit, we recommend that you use its AC adapter to power it. 0 If the USB storage device has been partitioned, each section will be treated as an independent device. 5. "Network" is displayed on the display when SETUP on the remote controller is pressed. Network 6. Press / and ENTER to select "Update" - "via USB" in order. Update 0 "Update" is not displayed if there are no firmware updates. 7. Press ENTER to start the firmware update. 0 "Completed" is displayed when the update is complete. 8. Press ÍON/STANDBY on the main unit to switch the unit to standby. The process is completed and your firmware is updated to the latest version. 9. Remove the USB storage device from this unit. If an error message is displayed: When an error occurs Error!" is displayed on the display of this unit. Check the following: 0 ˎ -01, ˎ -10: USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit. Connect the USB storage device to an external power source if it has its own power supply. 0 ˎ -05, ˎ -13, ˎ -20, ˎ -21: The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file. 0 Others: Disconnect then reconnect the AC power cord, then repeat from the beginning. E N 25