Onkyo TX-8390 User Manual English - Page 77
Setup, Switching the HDMI 4K Signal Format Input and Output by this Unit
View all Onkyo TX-8390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Switching the HDMI 4K Signal Format Input and Output by this Unit When the AV Component connected to this unit, such as a TV or player, and the HDMI cable (*) supports the high-definition 4K signal formats (4K 60p 4:4:4, 4:2:2 and 4K 60p 4:2:0 10bit), switch the setting value from "Standard" (default value) to "Enhanced". (*)Premium High Speed HDMI Cable or Premium High Speed HDMI Cable with Ethernet that have the "PREMIUM Certified Cable" label attached to the packaging. Enhanced Select when the AV component connected to this unit, such as a TV or player, and the HDMI cable (*) supports the high-definition 4K signal formats (4K 60p 4:4:4, 4:2:2 and 4K 60p 4:2:0 10 bit). • There may be some image disruption depending on the connected component and the HDMI cable. If this occurs, switch to "Standard". Perform the following procedure when the unit is on. 1. While pressing ZONE 2 on the main unit, press the cursor button to display the current setting on the display. While this is being displayed, while pressing ZONE 2, repeatedly press the cursor button to switch the setting. Standard (Default Value) Select when the AV component connected to this unit, such as a TV or player, supports the standard 4K signal format (4K 60p 4:2:0 8 bit). 2. To exit the settings, release your finger. After a few seconds, the display goes out and the switching is complete. Settings and the corresponding resolutions 4K (3840×2160p) 24/25/30 Hz 4K SMPTE(4096×2160p) 24/25/30 Hz 4K (3840×2160p) 50/60 Hz 4K SMPTE(4096×2160p) 50/60 Hz RGB/ YCbCr4:4:4 YCbCr4:2:2 RGB/ YCbCr4:4:4 YCbCr4:2:2 YCbCr4:2:0 Enhanced 8 bit 10/12 bit 12 bit 8 bit 12 bit 8 bit 10/12 bit Standard 77 Front Panel≫ Rear Panel≫ Remote≫