Onkyo TX-8390 User Manual English - Page 86
Distance, Level Calibration, Equalizer Settings - test
View all Onkyo TX-8390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Distance Set the distance from each speaker to the listening position. Setting Item Front Left Front Right Subwoofer Default Value 12.0 ft/3.60 m 12.0 ft/3.60 m 12.0 ft/3.60 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Default values vary depending on the regions. • The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m. 4. Level Calibration Adjust the volume level of each speaker. Setting Item Front Left Front Right Subwoofer Default Value 0.0 dB 0.0 dB 0.0 dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-15.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. 5. Equalizer Settings You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3. The number of frequencies that can be selected for each speaker is up to five bands for the Subwoofer and nine bands for the other speakers. Setting Item Front Subwoofer Default Value 0.0 dB 0.0 dB Setting Details After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency between "25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • This cannot be selected if "Configuration" - "Subwoofer" is set to "No". • Depending on the input source or listening mode setting, the desired effect may not be achieved. 86 Front Panel≫ Rear Panel≫ Remote≫