Onkyo TX-8390 User Manual English - Page 87
Audio Adjust, 4. Source, Volume, IntelliVolume, Name Edit
View all Onkyo TX-8390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Audio Adjust 1. Volume Change the Volume settings. Setting Item Mute Level Default Value -∞ dB Maximum Volume Off Power On Volume Last Headphone Level 0.0 dB Setting Details Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB" and "-20 dB". Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", and "50" to "99". Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max". • You cannot set a higher value than that of "Maximum Volume". Adjust the output level of headphones. Select a value between "-12.0 dB" and "+12.0 dB". 4. Source 1. IntelliVolume Adjust the volume level difference between the devices connected to the unit. Select the input selector to configure. Setting Item IntelliVolume Default Value 0.0 dB Setting Details Select from "-12.0 dB" to "+12.0 dB". Set a negative (-) value if the volume of the target device is larger than the others and a positive (+) value if smaller. To check the audio, start playback of the connected device. • This function is not effective in ZONE 2. 2. Name Edit Set an easy name for each input. The set name appears on the main unit's display. Select the input selector to make the setting. Setting Item Name Edit Default Value Input name Setting Details 1. S elect a character or symbol with the cursors, and press ENTER. Repeat this operation to input up to 10 characters. "A/a": Switches between upper and lower cases. (Pressing MODE on the remote controller also toggles between upper and lower cases Moves the cursor in the arrow direction. " ": Removes a character on the left of the cursor. " ": Enters a space. • Pressing CLR on the remote controller will remove all the input characters. 2. After inputting, select "OK" with the cursors, and press ENTER. The input name will be saved. To restore the name to the default value, press CLR on the remote controller on the input screen. Then while nothing is entered, select "OK", and press ENTER. • To name a preset radio station, press TUNER on the remote controller, select AM (North American models)/FM, and select the preset number. (Preset names cannot be given to DAB stations (European models)) • This cannot be set if the "NET" or "BLUETOOTH" input is selected. 87 Front Panel≫ Rear Panel≫ Remote≫