Onkyo TX-8511 Owner Manual - Page 23
Using, MONITOR
View all Onkyo TX-8511 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using TAPE-2 MONITOR Unless the component connected to the TAPE-2 connectors is to be used, the T-2 MONITOR indicator in the main unit's display should not be lit; otherwise, the sound from other sources cannot be heard. II a 3-head tape deck is connected to the TAPE-2 connectors, TAPE-2 MONITOR can he used to monitor the recording. NOTE: Even when TAPE-2 is not selected as the source (the T-2 MONITOR indicator is not lit), the source signal is still sent to the TAPE-2 output.' TAPES MONITOR B TX-8511 AMP. T-2 MONITOR Playback Recording Playback Tape deck TAPE-2 or Graphic Equalizer CD player, etc. Monitoring during recording. The source signal can be monitored through the speakers or headphones when TAPE-2 MONITOR is turned off. If the T-2 MONITOR indicator in the display is not lit, the sound front the source can be heard. If the 3-head tape deck connected to the TAPE-2 connectors is used for recording, press either the TAPE-2 button on the remote control or the TAPE-2 MONITOR button on the main unit to make "TAPE-2" appear in the display for a few seconds, light up the T-2 MONITOR indicator, and hear the sound that is just recorded. To return to listening to the source sound, press either the TAPE-2 button on the remote control or the TAI'E-2 MONITOR button on the main unit and the T-2 MONITOR indicator goes off. TAPE.? YOMITOR Using a graphic• eq' ualizer ";- 1. Connect the graphic equalizer to the TAPE-2 connectors on the rear panel of the TX-8511. 2. IF a second tape deck is used, connect it to the tape deck connectors on the graphic equalizer. 3. Press the TAPE-2 button on the remote control or the TAPE-2 MONITOR button on the main unit. The T-2 MONITOR indicator on the main unit's display lights up. 4. Follow the operating instructions for the graphic equalizer. To record an equalized signal, use the tape deck connected to the equalizer. 23