Onkyo TX-L50 User Manual English - Page 50

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others Quick Menu 1 50 By pressing the Q button on the remote controller during play, you can adjust frequently used settings, such as the ˙ AccuEQ AccuEQ Room Calibration: Enable or disable the E N sound quality, using on-screen menus. equalizer function that corrects for distortion caused by the 1. Press Q on the remote controller. acoustic environment of the room. If this is to be enabled, 2. After the Quick Menu is displayed, select the content with then normally you should select "On (All Channels)", and to S/T on the remote controller and press ENTER to disable just the front speakers you should select "On confirm your selection. (Except Front Left / Right)". The setting can be separately set to each input selector. Quick Menu BD/DVD Tone Level AccuEQ Other Bass Treble Equalizer: Select "Preset 1" to "Preset 3" configured in "2. Speaker" - "Equalizer Settings" (ÄP58) in the Setup menu. The same sound field setting is applied all ranges when set to "Off". 0 Change the initial values for each of the settings with the cursors W/X. 0 To return to the previous screen, press . 3. To exit the settings, press Q. ˙ Tone Bass: Enhance or moderate the bass range of the front speakers. Cinema Filter: Adjust the soundtrack that was processed to enhance its high pitch range, in order to make it suitable for home theater. This function can be used in the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby PL II Movie, Dolby Surround, Dolby TrueHD, Multichannel, DTS, DTS 96/24, DTS-HD High Resolution Audio, DTS-HD Master Audio, DTS Neural:X, DTS Express, Neo:6 Cinema, and DSD. Treble: Enhance or moderate the treble range of the front speakers. 0 It cannot be set if the listening mode is Direct. ˙ Level Center: Adjust the speaker level of the center speaker while listening to some sound. 0 It cannot be set if the listening mode is Direct. ˙ Other A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. Different settings can be set for each input selector. 0 It cannot be set if the listening mode is Direct. Subwoofer: Adjust the speaker level of the subwoofer while listening to some sound. 0 The adjustment you made will be reset to the previous status when you turn the unit to standby mode. Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input selector. The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream signals. 0 It cannot be set if the listening mode is Direct. Late Night: Make small sounds easily heard. It is useful