Onkyo TX-L50 User Manual English - Page 65

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others ˙ 3. Bluetooth Status Displays the status of the BLUETOOTH enabled device E Bluetooth Select whether or not to use the BLUETOOTH function. "On (Default Value)": Enables connection with a BLUETOOTH enabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings. connected to the unit. "Ready": Not paired "Pairing": Paired "Connected": Successfully connected N Auto Input Change "Off": When not using the BLUETOOTH function The input of the unit will automatically be switched to "BLUETOOTH" when connection is made from a BLUETOOTH 0 Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH function is started up. enabled device to the unit. "On (Default Value)": The input will automatically become "BLUETOOTH" when a BLUETOOTH enabled device is connected. "Off": The function is disabled. ˙ 4. Power Management Sleep Timer Allows the unit to enter standby automatically when the specified time elapses. Select from "30 minutes", "60 minutes", and "90 0 If the input is not switched automatically, set to "Off" and change the input manually. minutes". "Off (Default Value)": Does not turn the unit to standby Auto Reconnect This function automatically reconnects to the BLUETOOTH automatically. enabled device connected last when you change the input to Auto Standby This setting places the unit on standby automatically after 20 "BLUETOOTH". "On (Default Value)": Use this function "Off": Do not use this function minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is on, this becomes the HYBRID STANDBY mode which reduces the Pairing Information 0 This may not work with some BLUETOOTH enabled devices. You can initialize the pairing information saved on this unit. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. 0 This function does not initialize the pairing information on the BLUETOOTH enabled device. When pairing the unit again increase in power consumption to a minimum.) "On (Default Value)": The unit will automatically enter standby mode ("ASb" will stay lit). "Off": The unit will not automatically enter standby mode. 0 "Auto Standby" is displayed on the display of this unit and TV screen 30 seconds before the Auto Standby comes on. with the device, be sure to clear the pairing information on the Auto Standby in HDMI Enable or disable "Auto Standby" while "HDMI Standby Through" BLUETOOTH enabled device in advance. For information on Standby Through is on. how to clear the pairing information, refer to the BLUETOOTH "On": The setting will be enabled. Device enabled device's instruction manual. Displays the name of the BLUETOOTH enabled device connected to the unit. "Off": The setting will be disabled. 0 This setting cannot be set to "On" if "Auto Standby" is set to "Off". 0 The name is not displayed when "Status" is "Ready" and "Pairing". 65