Onkyo TX-L50 User Manual English - Page 63

> Before Start > Part Names > Install > Initial Setup > Playback Supplementary Information | Advanced Setup | Others Audio TV Out You can enjoy audio through the speakers of the TV while this ˙ 2. Network E unit is on. 0 When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting N "On": Use this function automatically. To assign fixed IP addresses to each component, you must set "DHCP" to "Off (Default Value)": Do not use this function "Disable" and assign an address to this unit in "IP Address" as well as set information 0 The setting is fixed to "Auto" if "HDMI CEC" is set to "On". If related to your LAN, such as Subnet Mask and Gateway. you change this setting, set "HDMI CEC" to "Off." 0 Listening mode cannot be changed while "Audio TV Out" is Wi-Fi Connect the unit to network via wireless LAN router. set to "On" and audio is being output through the speakers of "On": Wireless LAN connection the TV. "Off (Wired) (Default Value)": Wired LAN connection 0 Depending on your TV set or input signal of the component, audio may not output through the speakers of the TV even if this setting is set to "On". In such case, audio is output from the speakers of the unit. 0 If you operate the volume dial on this unit when audio that is Wi-Fi Setup You can configure wireless LAN settings by pressing ENTER when "Start" is displayed. 0 Refer to "3. Network Connection" (ÄP20) in Initial Setup for details. being input through this unit for output from the TV speakers, Wi-Fi Status The information of the connected access point will be displayed. audio is output from this unit. If you do not want to output "SSID": SSID of the connected access point. audio from the unit, change the unit or TV settings, or reduce "Signal": Signal strength of the connected access point. the volume of the unit. "Status": Status of the connected access point. Audio Return Channel Auto Lip Sync You can enjoy sound of the HDMI connected ARC compatible TV through the speakers connected to the unit. To use this function, set "HDMI CEC" to "On" in advance. "Auto": When enjoying the TV sound through the speakers connected to the unit "Off": When not using the ARC function This setting automatically corrects any desynchronization between the video and audio signals based on data from the HDMI LipSync compatible TV. "On (Default Value)": Automatic correction will be enabled. "Off": Automatic correction will be disabled. MAC Address DHCP IP Address Subnet Mask Gateway DNS Server This is the MAC address of this unit. This value is specific to the component and cannot be changed. "Enable (Default Value)": Auto configuration by DHCP "Disable": Manual configuration without DHCP If selecting "Disable", you must set "IP Address", "Subnet Mask", "Gateway", and "DNS Server" manually. Displays/Sets the IP address. Displays/Sets the subnet mask. Displays/Sets the gateway. Displays/Sets the primary DNS server. Proxy URL Displays/Sets the proxy server URL. Proxy Port Displays/Sets the proxy server port number when you enter "Proxy URL". 63