Panasonic AG-HMC80PJ Basic Operating Instructions - Page 26

Power sources, Using the battery, Using the AC adaptor, CAUTION

Get Panasonic AG-HMC80PJ PDF manuals and user guides View all Panasonic AG-HMC80PJ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Power sources Using the battery Installation Insert the battery until it clicks into place. Removal 1 Set the POWER switch to OFF, and check that the mode lamp is off. 2 Remove the battery while pressing the battery release button. • The lock can be released and the battery removed. Preparation Using the AC adaptor Installation 1 Connect the DC cable to the AC adaptor. 2 Plug the AC power supply cable into the power outlet. 3 Insert the DC cable's battery connector until it clicks into place. %1/210'06 Removal 1 Set the POWER switch to OFF, and check that the mode lamp is off. 2 Remove the DC cable's battery connector while pressing the battery release button. 3 Disconnect the AC power supply cable from the power outlet. DC cable's battery connector • Battery cannot be recharged when the DC cable is connected to the AC adaptor. • Disconnect the AC power supply cable from the power outlet when the unit is not going to be used. CAUTION: • This apparatus can be operated at a voltage in the range of 110 - 240 V AC. Voltages other than 120 V are not intended for U.S.A. and Canada. Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
±6
Preparation
Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the battery while pressing the
battery release button.
The lock can be released and the battery
removed.
•
Using the AC adaptor
Installation
1
Connect the DC cable to the AC adaptor.
2
Plug the AC power supply cable into the
power outlet.
3
Insert the DC cable’s battery connector until
it clicks into place.
DC cable’s battery
connector
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the DC cable’s battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cable from
the power outlet.
Battery cannot be recharged when the DC
cable is connected to the AC adaptor.
Disconnect the AC power supply cable from the
power outlet when the unit is not going to be used.
•
•
CAUTION:
This apparatus can be operated at a voltage in
the range of 110 – ±40 V AC.
Voltages other than 1±0 V are not intended for
U.S.A. and Canada.
Operation at a voltage other than 1±0 V AC may
require the use of a different AC plug.
Please contact either a local or foreign
Panasonic authorized service center for
assistance in selecting an alternate AC plug.
•