Panasonic AG-HMC80PJ Basic Operating Instructions - Page 29
The remote control, Insert the battery, Remote control usable range
View all Panasonic AG-HMC80PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Preparation The remote control Insert the battery 1 Push the catch in the direction shown by arrow ① to remove the holder. 2 Insert the battery with the "+" marked side facing up. Remote control usable range The distance between the remote control and the unit's remote control sensor: Within approx. 5 m Angle: Approximately 15° upward, approximately 10° downward, approximately 15° leftward, or approximately 15° rightward (Except when optional accessories are attached) Remote control sensor 3 Return the holder to its original position. • When the battery (CR2025) has run out, replace it with a new one. (The battery lasts about one year, depending on the frequency of use.) If the remote control unit fails to work even when it is operated near the camera-recorder's remote control sensor, the battery has run out. • Keep the battery out of the reach of children. • The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges. • The default setting for this item is OFF. To use the remote control, set the IR REMOTE item on the OTHER FUNCTIONS menu to ON. (Page 110 of Vol.2) 29