Panasonic AG-HPX370 AGHPX370P User Guide - Page 133
Setup menu list, SCENE FILE screen
View all Panasonic AG-HPX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Chapter 7 Menu Operations Setup menu list SCENE FILE screen Item Setting Notes LOAD/SAVE/INIT Loads, saves and initializes settings of the scene file • A change in scene files affects only assigned to the current scene dial position (one F1 the scene file at the current scene dial - F6 scene file). position. LOAD: Loads data stored in camera memory. • Not available when compiling to a clip SAVE: Saves current values in camera memory. in one-clip recording mode. INITIAL: Returns settings to their factory defaults. VFR Enables or disables variable frame rate (VFR) mode at • Available only in 720P system mode. 720P. (This message does not appear in ON: VFR operation modes other than 720P.) OFF: VFR off • This setting cannot be made when REC SIGNAL is 1394. FRAME RATE Adjusts the frame rate and exposure time at 720P • Available only in 720P system mode when VFR is on. and when VFR is set to ON. (When SYSTEM MODE is set to 720-59.94P) (This message does not appear in 12, 15, 18, 20, 21, 22, 24, 25, 26, 27, 28, 30, 32, 34, modes other than 720P.) 36, 40, 44, 48, 54, 60 FRAME • This setting cannot be made when (When SYSTEM MODE is set to 720-50P) REC SIGNAL is 1394. 12, 15, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32, • A change to 24 fps may cause the 34, 37, 42, 45, 48, 50 FRAME screen to flicker momentarily. (SYNCHRO SCAN) Displays synchro scan shutter speeds to enable the • Displayed in blue when not set to operator to synchronize the camera to computer synchro scan mode and when the monitors. SYNCHRO SCAN switch settings are • This function only displays the shutter speeds. Use not available. the SYNCHRO SCAN switch to set a shutter speed. • When SYSTEM MODE is set to 1080- • Set values (displayed values) are assigned to the 50i, 720-50i or 576-50i, performing the current scene file and manipulated using the LOAD, INITIAL option of the scene files will SAVE and INIT functions. set the default value to 1/50.0. For details, refer to [Placing the Camera-recorder in SYNCHRO SCAN Mode] (page 59). 1/60.0 DETAIL LEVEL Adjusts the level of image outline correction (in horizontal and vertical directions). -7 ... 0 *1... +7 V DETAIL LEVEL Adjusts the level of correction in vertical direction. -7 ... 0 *1 ... +7 DETAIL CORING Adjusts the level of noise reduction of the detail signal. -7 ... +5 *1 ... +7 • A djust towards - for a clearer image. Noise increases slightly. • Adjust towards + for less noise. CHROMA LEVEL Adjusts the chroma level. -7 ... 0 *1 ... +7 CHROMA PHASE Makes fine adjustments to the chroma phase. -7 ... 0 *1 ... +7 COLOR TEMP Ach Makes fine adjustments to the color temperature (after Ach white balance adjustment). -7 ... 0 *1 ... +7 COLOR TEMP Bch Makes fine adjustments to the color temperature (after Bch white balance adjustment). -7 ... 0 *1 ... +7 *1 The factory default when the SCENE FILE dial is set to F1. ____ indicates the factory setting 133