Panasonic AG-HPX370 AGHPX370P User Guide - Page 137
SW MODE screen, Setting, Notes, USB HOST, USB DEVICE, 3dB, 0dB, 6dB, 9dB, 12dB, 2K, 5.6K
View all Panasonic AG-HPX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 7 Menu Operations Item PC MODE SELECT PC MODE Setting Notes Sets camera operating mode when PC MODE is set to • Not available when PC MODE is set ON and an external device is connected via USB. to ON. USB HOST: Selects USB 2.0 for connecting an external hard disk drive. (For details, refer to page 150.) USB DEVICE: Makes it possible to connect the camera to a computer via USB 2.0 to enable use of a P2 card as mass storage. (For details, refer to page 149.) Operates the camera according to mode selected • N ot available when compiling to a clip using PC MODE SELECT. in one-clip recording mode. ON: Operates in PC MODE. OFF: Terminates PC MODE and returns the camera to normal operation. • This function is always set to OFF when the power is turned on. SW MODE screen Item LOW GAIN MID GAIN HIGH GAIN ATW ATW TYPE W.BAL.PRESET Setting Sets the gain value assigned to the L position of the GAIN switch. Notes -3dB, 0dB, 3dB, 6dB, 9dB, 12dB Sets the gain value assigned to the M position of the GAIN switch. -3dB, 0dB, 3dB, 6dB, 9dB, 12dB Sets the gain value assigned to the H position of the GAIN switch. -3dB, 0dB, 3dB, 6dB, 9dB, 12dB Allows you to assign the ATW (Auto Tracking White Balance) function to the WHITE BAL switch. (For details, refer to page 56.) Bch: Controls the ATW function when the WHITE BAL switch is set to B position. OFF: Does not assign the ATW function to the WHITE BAL switch. Selects type of ATW (Auto Tracking White Balance) function operation. 1: Standard ATW operation 2: Further restricts the color of the light source range that is tracked than setting 1. ATW operation reduces the risk of miscalculating light sources. Sets the color temperature assigned to the PRST position of the WHITE BAL switch. 3.2K, 5.6K • A USER button to which ATW has been assigned cannot be used to turn ATW off when the WHITE BAL switch is set to B position and this menu is set to Bch. ____ indicates the factory setting 137