Panasonic AG-HPX370 AGHPX370P User Guide - Page 141
Setting, Notes, Normal, Always, Chsel, On, Off, Stereo, Mix, 40db, -50db, 18db, Single
View all Panasonic AG-HPX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Chapter 7 Menu Operations Item 25M REC CH SEL TEST TONE F.MIC POWER R.MIC POWER MONITOR SELECT F.MIC LEVEL R.MIC CH1 LEVEL R.MIC CH2 LEVEL HEADROOM WIRELESS WARN WIRELESS TYPE Setting Notes Selects the audio channels to be recorded in the • N ot available in the following DVCPRO and DV formats. conditions. 2CH: Only recorded on CH1 and CH2. - W hen SYSTEM MODE is 1080-59.94i 4CH: Records on all four channels. (1080-50i) or 720-59.94P (720-50P). - When SYSTEM MODE is set to 480- 59.94i (576-50i) and REC FORMAT is set to the DVCPRO50 codec. - REC SIGNAL is set to 1394 (operation depends on 1394 input status). - When compiling to a clip in one-clip recording mode. Selects the test signal. NORMAL: Outputs test tones to channels 1, 2, 3 and 4 when the OUTPUT/AUTO KNEE selector switch is set to BARS and the AUDIO IN switch CH1 is set to FRONT. ALWAYS: Outputs test tones to channels 1, 2, 3 and 4 at all times when the OUTPUT/AUTO KNEE selector switch is set to BARS. CHSEL: Outputs test tones to channels selected by setting the AUDIO IN switch CH1 or CH2 to FRONT and the OUTPUT/AUTO KNEE selector switch is set to BARS. (Test tones are not output to CH3 and CH4.) OFF: Does not output a test tone. Turns on and off the phantom power supply for the front microphone. ON, OFF Turns on and off the phantom power supply for the rear microphone. ON: Turns on the phantom power supply to the microphone when the rear LINE/MIC/+48V switch is set to +48V. OFF: Does not supply phantom power to the microphone even when the rear LINE/MIC/+48V switch is set to +48V. Switches the output signal to AUDIO OUT, earphones and speaker when the MONITOR SELECT switch is set to ST. STEREO, MIX Selects the input level for the front microphone. -40dB, -50dB, -60dB Selects the input level for the rear microphone connected to CH1. -50dB, -60dB Selects the input level for the rear microphone connected to CH2. -50dB, -60dB Sets the headroom (standard level). • The default setting for the AG- 18dB, 20dB HPX371E is 18 dB. Sets whether a warning should be output when wireless receiver reception is poor. ON, OFF Selects wireless receiver type. SINGLE: 1-channel receiver DUAL: 2-channel receiver • W hen DUAL is selected for a 1-channel wireless receiver, CH2 and CH4 will stay mute. ____ indicates the factory setting 141