Panasonic AG-HPX370 AGHPX370P User Guide - Page 42
Special Recording Modes, Pre-recording (PRE REC)
View all Panasonic AG-HPX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 3 Recording and Playback Special Recording Modes During P2 card recording, the following special recording modes can be enabled from the RECORDING SETUP screen: pre-recording, interval recording, one-shot recording, loop recording, and one-clip recording. These recording modes (excluding one-clip recording) are available only with the following settings. One-clip recording mode is available in all recording modes, except when VFR is turned ON in 720P system mode. SYSTEM MODE 1080-59.94i 1080-50i 720-59.94P 720-50P 480-59.94i 576-50i REC FORMAT DVCPROHD/60i AVC-I 100/60i AVC-I 50/60i DVCPROHD/50i AVC-I 100/50i AVC-I 50/50i DVCPROHD/60P AVC-I 100/60P AVC-I 50/60P DVCPROHD/50P AVC-I 100/50P AVC-I 50/50P DVCPRO 50/60i DVCPRO/60i DV/60i DVCPRO 50/50i DVCPRO/50i DV/50i Other conditions Set CAMERA MODE to 60i or 30P Turn VFR OFF Turn VFR OFF Set CAMERA MODE to 60i or 30P 3 Press the REC button. This setting will record audio and video a time period prior to start of recording. • The following recording modes will disable the pre-recording function and start respective recording function when selected. • Recording of video input via the IEEE1394 connector • When changing recording formats • After a change from playback to recording • During interval recording • During one-shot recording • During loop recording • There may be a short delay in start of audio and video recording when the REC button is pressed directly after switching from thumbnail display or playback to view what you are shooting, after turning the power on and after changing the PREREC MODE. Pre-recording (PRE REC) This function is used to start recording a certain number of seconds (approx. 3 seconds for HD recordings or approx. 7 seconds for SD recordings) before actual recording starts. Starting recording Stopping recording (time) Actual recording time PRE REC time 1 Check that the SYSTEM SETUP screen is set up as described above. For details on menu operation, refer to [Using the menus] (page 129). 2 Set the menu option PREREC MODE to ON in the RECORDING SETUP screen. • The following indications appear in the special recording display area in the viewfinder. Recording: P-REC lights Pause: P-PAUSE lights For details, refer to [Screen displays] (page 75). 42