Panasonic AG-HPX370 AGHPX370P User Guide - Page 36
Shooting, Setting the switches before shooting and, recording, White/Black Balance Adjustment
View all Panasonic AG-HPX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Setting the switches before shooting and recording When a battery and P2 cards are installed, set the switches as detailed below, before starting to use your AGHPX370P/AG-HPX371E. f e Shooting White/Black Balance Adjustment to Recording Completion For shooting, follow the steps below. 1 Chapter 3 Recording and Playback 3 5, 6 4 2 a b cdb 1 Use the ND FILTER control to select a filter a Iris according to ambient light conditions. The iris is automatically adjusted when the lens is set to the auto iris mode. b USER MAIN/USER1/USER2 Assigning the SLOT SEL function to a USER button 2 When the white balance is saved: • Position the WHITE BAL switch to [A] or [B]. allows you to select one of the two inserted P2 cards for When the white or black balance is not saved recording. and you have no time to adjust the white The P2 card selected for recording switches with each press of the USER button, and the P2 CARD ACCESS LED of the selected P2 card lights orange. The slot number of the card to be recorded appears in green in the LCD monitor and the viewfinder. For more information on viewfinder displays, see [Viewfinder Screen Status Displays] (page 74). balance: • Position the WHITE BAL switch to [PRST]. • The color temperature can be set to 3200 K or 5600 K. If the white balance is adjusted on the spot: • Select a filter according to ambient light conditions. Then, position the WHITE BAL NOTE • The slot selected for recording cannot be changed when recording has started. Perform this operation during recording standby. • Use the USER MAIN/USER1/USER2 item in setting menu switch to [A] or [B] and shoot a white test subject so that it appears at the center of the screen. Then, follow the steps below to adjust the white balance. 1. Turn the AUTO W/B BAL switch toward [AWB] SW MODE screen to assign functions to the USER MAIN/ to adjust the white balance. USER1/USER2 button. 2. Turn the AUTO W/B BAL switch toward [ABB] c GAIN switch Normally, this should be set to L (0 dB). If conditions are too dark, an appropriate gain level should be set. d AUTO KNEE selector switch Set to ON or OFF. Selecting BARS turns off this function and outputs a color bar signal. to adjust the black balance. 3. Turn the AUTO W/B BAL switch toward [AWB] to adjust the white balance again. For directions on making adjustments, see [Adjusting the White Balance] (page 55) and [Adjusting the Black Balance] (page 56). e TCG Set to F-RUN or R-RUN. f AUDIO SELECT CH 1/CH 2 Set to AUTO. 36