Panasonic AG-HPX370 AGHPX370P User Guide - Page 163
Warning and Error Display for Thumbnail Operation and USB HOST MODE, Message, Description, Measure
View all Panasonic AG-HPX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Chapter 9 Maintenance and Inspections Warning and Error Display for Thumbnail Operation and USB HOST MODE Item Message Description Measure CANNOT ACCESS! Data cannot be accessed because it is corrupted or for other reasons. Restore media and clips to normal state before access. Any thumbnails that cannot be produced CANNOT CHANGE! on the AVC-Intra 100 or AVC-Intra 50 and displayed in gray cannot be changed at the Set SYSTEM MODE according to the clips. text memo position. CANNOT COPY! Images cannot be copied. Check the conditions for copying. CANNOT DELETE ! P2 card contains contents version mismatches or bad clips. Match devices and contents versions, and repair bad clips. CANNOT FORMAT! P2 card problem prevents formatting. Check P2 card. CANNOT RECONNECT! A clip that does not span multiple P2 cards cannot be reconnected. Check selected content. CANNOT REPAIR! Data cannot be repaired since content that cannot be repaired is selected. Check selected content. CANNOT REPAIR IN SELECTION! Some of the selected clip could not be repaired. - CARD FULL! The P2 or SD card is full. Insert media with sufficient capacity. INVALID VALUE! Entered data was invalid. Enter data in a valid range. LACK OF REC There is not enough recording capacity left Insert a card with sufficient recording CAPACITY! on the card. capacity. MISSING CLIP! Thumbnails A shot mark will be added to the clips recorded on multiple P2 cards when all P2 cards are not inserted yet. Insert all P2 cards with recorded clips, and confirm that the ! incomplete clip indicators disappear, and then add shot marks. NO CARD! No P2 or SD card is inserted. Insert compatible media. NO COPY TO SAME A clip cannot be copied to the card storing Copy the selected clip to a card that does CARD! the original clip. not contain the original clip. NO FILE! The designated file is not found. Check the file. NO SD CARD! No SD card is inserted. Insert an SD card. SAME CLIP IS SELECTED! The clip cannot be copied because a clip Confirm the selected clip and release that has already been copied and the original either the source clip or the destination clip have been selected. clip and then execute the copy operation. TOO MANY CLIPS! Too many clips are selected. Reduce the number of selected clips. • Match devices and contents versions. UNKNOWN P2 card contains contents version CONTENTS FORMAT! mismatches or corrupted content. • If corrupted clips exist (including corrupted clips that are located on the copy destination), repair the corrupted clips or delete them. Use UTF-8 for the metadata character UNKNOWN DATA! The metadata character code is invalid. code. Use the viewer to enter correct characters. The user clip name plus the counter USER CLIP NAME MODIFIED! Characters in the clip name had to be deleted in adding the counter value. value can only contain up to 100 bytes. Characters in the clip name are automatically deleted when the total exceeds 100bytes. WRITE PROTECTED! The P2 or SD card is write protected. Insert write-enabled media. Soft CANNOT CHANGE! [PERSON] will be entered while the text memo is not available. Enter [TEXT] before entering [PERSON]. keyboard CANNOT VALUE! SET! INVALID The entered value is incorrect. Change the value. (Continued on the next page) 163