Panasonic AW-HS50 Basic Operating Instructions - Page 11
Parts and their functions, Control panel
View all Panasonic AW-HS50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1. Parts and their functions 1-1. Control panel Compact Live Switcher AW-HS50 POWER ALARM LINK USER 1 3 USER 2 4 SHIFT OSD/TIME OSD ON AUX PinP KEY-F/S BUS DELEGATION MIX WIPE TRANSITION TYPE PinP ON KEY ON FTB ON KEY-S AUX PGM 16 KEY-F PinP AUX PVW 27 KEY OUT 38 CLN 49 MV 5 10 A SHIFT B SHIFT CUT AUTO BKGD POWER indicator [POWER] This indicator lights when the POWER switch () on the rear panel is set to ON while power is supplied to the DC IN connector (). ALARM indicator [ALARM] This indicator lights when the cooling fan () has stopped running, when there is a problem with the power supply (voltage drop) or when the temperature inside the unit has reached an abnormally high level. When this occurs, an alarm message appears on the OSD menu while the OSD menu is displayed on an external monitor (in the OSD ON status). The alarm information can be output to an external device from the unit's TALLY/GPI connector (). Refer to "5-2. TALLY/GPI" ( Operating Instructions). When an alarm has occurred, stop using the unit immediately, and be absolutely sure to contact your dealer. Continuing to use the unit even after an alarm has occurred could damage the unit. LINK indicator [LINK] This indicator lights when the unit is linked on a network with the AW-RP50 remote camera controller available as an option. The link setting must be enabled at both the unit and AW-HS50. 11