Panasonic AW-HS50 Basic Operating Instructions - Page 17

1. Parts and their functions  DVI OUT connector [DVI OUT] This is the DVI-D signal output connector. Signals with the following resolution can be output from this connector by menu operations. Digital RGB (vertical frequency: 60 Hz): XGA (1024  768), WXGA (1280  768), SXGA (1280  1024), WSXGA+ (1680  1050), UXGA (1600  1200), WUXGA (1920  1200) Digital RGB: 1920  1080/50p, 1920  1080/59.94p Furthermore, the following signals can be assigned by menu operations. PGM, PVW, CLN, AUX, MV, KEYOUT The connector supports the high-resolution multi view mode so that images can be output at a high resolution when SD has been selected as the system format.  Analog signals cannot be output from this connector. A DVI-I cable cannot be used.  When the high-resolution multi view mode has been enabled, MV signals are assigned to the DVI OUT connector, and they cannot be assigned to the SDI OUT 1 connector or SDI OUT 2 connector.  TALLY/GPI connector [TALLY/GPI] (D-sub 15-pin, female, inch thread) This connector features five contact input ports for controlling the unit from an external device and seven open collector output ports for outputting the tally information and alarm information from the unit.  Cooling fan  DC IN connector [12V IN] (DC 12 V, 2.0 A) The AC adapter provided with the unit is connected to this connector.  Ground terminal [SIGNAL GND] Connect this to the system's ground.  SERVICE switch [SV/NM] This switch is used for maintenance purposes. For normal operations, select the "NM" position.  Wire fastening fitting An anti-theft wire available on the market can be fastened to this fitting to prevent theft.  LAN connector [LAN] (RJ-45) (10BASE-T/100BASE-TX) The remote camera, remote camera controller and host computer supporting IP connections to this LAN connector are connected using LAN cables. When a device is connected directly to the unit, use a crossover cable (category 5 or above). When a device is to be connected to the unit through a hub (switching hub), for instance, use a straight cable (category 5 or above). 17