Panasonic BT-LH1710 User Manual - Page 22
System Config, Setup Save
UPC - 092281890852
View all Panasonic BT-LH1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Main Menu (continued) SYSTEM CONFIG Underlined values indicate factory defaults. Sub menu CONT./BACK. Settings BACKLIGHT CONTRAST BACKLIGHT SUB WINDOW 0 - 60 FULL PART MENU POSITION STATUS DISPLAY CENTER LB RB RT LT CONTINUE 3SEC OFF OFF SETUP LOAD SETUP SAVE POWER ON SETUP COLOR SPACE POWER SAVE MODE USER5*1*2 USER4*1*2 USER3*1*2 USER2*1*2 USER1*1*2 FACTORY USER5*2 USER4*2 USER3*2 USER2*2 USER1*2 USER5 USER4 USER3 USER2 USER1 FACTORY LAST SMPTE-C*5 EBU*5 ITU-709*4 OFF ON BLACK DATA INSERTION*6 OFF ON Description Selects function to be assigned to [CONTRAST/BACKLIGHT] (front panel knob). Adjusts the BACKLIGHT. Adjusts the CONTRAST. Adjusts LCD backlight brightness. Adjust as required by ambient conditions. Selects sub-window type. Reduces the entire images for both input signals and places them side by side. Cuts out the center of the images for both input signals and places them side by side (the images are shown at their original size). Positions the on-screen menu. Center of the screen Left Bottom Right Bottom Right Top Left Top Sets display state for input signal status (on-screen menu). Displayed at all times Displayed for 3 seconds after a status change. Not displayed. Loads saved factory defaults (FACTORY) or user data (USER1 - USER5). After loading user data, the screen displays the signal selected before user data was loaded. Up to 5 sets of user data can be saved (J page 16). They save menu settings and adjustments made with the picture adjusting knob (PHASE/CHROMA/BRIGHT/CONTRAST/BACKLIGHT) except "SETUP SAVE/SETUP LOAD." Selects the settings used when the power is turned on. Starts in the mode used when the power was last turned off. Starts up using the factory defaults. Starts up using USER registered settings. Sets the studio standard color shade. Sets the power save mode The backlight dims when no signal (NO SIGNAL) is input for 60 seconds or longer. Signal input or menu operation will return the backlight to its normal brightness. Doubles the speed of the LCD panel.*3 Double speed (120 Hz/100 Hz) Standard speed (60 Hz/50 Hz) *1 When the monitor is shipped, settings for "USER1" - "USER5" are identical to "FACTORY." *2 "H-POSITION", "V-POSITION", "PHASE" and "CLOCK" (J page 31) cannot be saved or loaded. *3 When double speed is applied, image lag is reduced by inserting a black signal. However, luminance is lowered compared to standard speed, and some images may generate flicker. If flicker becomes too noticeable, return to standard speed (60 Hz/50 Hz). *4 ITU-709 is an ITU-R BT.709 standard. *5 Factory preset settings are The U.S.A. and Canada: SMPTE-C, Others: EBU. *6 This feature can be displayed and set only on the BT-LH1760. 22