Panasonic BT-LH1710 User Manual - Page 26

Main Menu (continued) • PART Resizes the main window to show only its center to also display a second image (two sub-windows). Press the FUNCTION button to which the SUB WINDOW function has been assigned. Normal window (main window) Press the button again Before image input (two sub-windows) Press the button again After image input (two sub-windows) Video Crops the image to show its center part Video Video Still image Video The cropped main window image is placed side by side with a second image These examples show 16:9 aspect ratio images. Note on FULL/PART selection This function is designed to enable comparison of identical formats input to the same input terminal. Input of different formats via different input channels may distort the sub-window (left side, still image) or blanking could occur. However, input of an identical format signal to the input terminal during still image acquisition will display correctly. ■ "WFM/VECTOR" The "WFM/VECTOR" function enables display of the waveform and vector display. Use "DISPLAY SETUP" in the main menu to select "WFM" and "VECTOR" display. (J page 33) Press the button ([FUNCTION1] to [FUNCTION5] (J page 23)) to which the "WFM/VECTOR" function has been assigned to turn the function on and off. (This assumes that the "WFM/VECTOR" function has been assigned to any of the [FUNCTION1] to [FUNCTION5] buttons.) Press the FUNCTION button to which the WFM/VECTOR function has been assigned. Normal screen Press the button again WFM display Press the button again VECTOR display*1 *1 Displayed only for SDI signal input. WFM (waveform display) VECTOR (vector display) These examples show 16:9 aspect ratio images. 26