Panasonic BT-LH1710 User Manual - Page 30

Main Menu (continued) INPUT SELECT Sub menu VIDEO NTSC SETUP Settings AUTO NTSC PAL 75 00 YPBPR/RGB YPBPR RGB-VIDEO RGB-COMP. COMPONENT LEVEL SMPTE B75 B00 SELECT SYNC INT EXT COMP. DVI-D DVI-VIDEO DVI-COMP. Underlined values indicate factory defaults. Description Selects the video input format.*1 Automatically selects NTSC or PAL. NTSC PAL Selects NTSC setup level. Select this function when using 7.5% setup signals. (Adjusts the interior of the monitor to the 7.5% setup level to suit the black level) Select this when there is no setup signal. Selects YPBPR (component) or RGB input mode. Selects the YPBPR signal. Selects the video RGB signal. Selects the PC RGB signal. Selects YPBPR (component) signal input level. Signal level complies with SMPTE and PB and PR are 0.7 Vp-p at 100% chroma. Select this when connecting a Betacam or similar device with a setup function. (Adjusts the interior of the monitor to the 7.5% setup level to suit the black level) Select this when connecting a Betacam or similar device without a setup function. Selects the sync signal when using YPBPR and RGB-VIDEO input. Select when the synchronizing signal is superimposed on the G or Y signal. Select to synchronize with an external synchronizing signal. Performs analog PC settings. ("COMP." J page 31) Selects DVI-D input mode. Selects component input. Selects PC input. *1 "AUTO" is the factory default, but select a specific format when there is risk that the input signal may be contaminated by outside noise. 30