Panasonic HDC-TM10K Hd Sd Camcorder - Multi Language - Page 41
Quick start, Quick power on, Select the menu., Close the LCD monitor while the, mode is set
UPC - 037988984374
View all Panasonic HDC-TM10K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Quick start This unit will resume recording pause mode about 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick Start Standby mode about 70% of the power used in Recording Pause mode is being consumed, so the recording time will be reduced. ≥ Start time will not shorten if there is no SD card inserted. / Start time will be shorten if the [Built-in Memory] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ¬ Change the mode to . 1 Select the menu. (l 29) [SETUP] # [QUICK START] # [ON] 2 Close the LCD monitor while the mode is set to . ≥ If [ECONOMY] (l 31) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Turn the unit off using the power button. Quick power on When the power is turned on with the mode set to , the unit will enter the recording pause mode after about 1.9 seconds. ¬ Change the mode to . Select the menu. (l 29) [SETUP] # [QUICK POWER ON] # [ON] ≥ This function's default setting is [ON]. ≥ In the Quick power on mode, the zoom magnification becomes 1k. The status indicator A flashes green and the unit goes into quick start standby mode. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed jmode is set to with the LCD monitor closed. ≥ Time for Quick Start will be more than 0.6 seconds slower when the digital cinema is used. ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick start mode, the zoom magnification becomes 1k. 41 VQT2H52