Panasonic HDC-TM10K Hd Sd Camcorder - Multi Language - Page 58
Relay recording, Select the menu., Auto Ground, Directional Standby
UPC - 037988984374
View all Panasonic HDC-TM10K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Function / Relay recording Auto GroundDirectional Standby (AGS) Effect/Setting method It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. Select the menu. (l 29) [RECORD SETUP] # [RELAY REC] # [ON] ≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts. ≥ It allows you to record only to SD card from built-in memory. ≥ Relay recording can only be performed once. ≥ Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE] into the SD card. (l 88) ≥ Once the relay recorded scene and the scene that was recorded on the SD card after that are combined into the SD card using the [RELAY SCENE COMBINE], it will be possible to perform the relay recording again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform relay recording by touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that. If the unit continues to be tilted upside down from the normal horizontal position while recording motion pictures, it is automatically put into recording pause. Select the menu. (l 29) [RECORD SETUP] # [AGS] # [ON] 58 VQT2H52