Panasonic KX-P1131E Operating Instructions - Page 30
Top of Form Function (TOF SET
View all Panasonic KX-P1131E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the Control Panel Top of Form Function (TOF SET) This printer has a Top of Form (TOF) function which stores the first print line position and loads the paper to the designated position automatically. The first print line position will be stored even after the power is turned off. You can adjust the Top of Form position through the Control Panel Software program (Page 25), or using Micro Line Feed or Reverse Micro Line Feed from the Control Panel within 125 mm (5 in.) from the top of your paper. Note • • Do not rotate the platen knob, otherwise the printer will not be able to count the number of lines properly. All adjustments must be made on the first sheet. If you decide to change the setting and save it, remove the paper from the tractors, then reset and reload the paper. Reverse Micro Line Feed: While pressing ON LINE , press LOAD/PARK . This reverses the paper one micro line [0.14 mm (1/180 in.)]. The printer cannot reverse the paper past the printable area (Page 44). 3. At your desired position within 125 mm (5 in.) from the top of your paper, release the switches. The paper position will be stored automatically as the new Top of Form position. 1. If necessary, redefine the page length of the paper you are using through the Control Panel Software program (Page 25), Control Panel (Page 28) or your application software. 2. Micro Line Feed: While pressing ON LINE , press TEAR OFF . This advances the paper one micro line [0.14 mm (1/180 in.)]. 30 Operating Instructions