Panasonic KX-TG2226WV 2.4 Ghz Digital - Page 12

Programmable Functions Useful information: • If Select is pressed while "---(Go back)---" is displayed, the unit will go back to the previous menu mode. If you press the key in the main menu, the unit will exit programming mode. • After programming is complete, the display will return to the main menu or the sub-menu depending on which menu the selected item is located. (See the menu table below.) • You can exit programming mode any time by pressing [OFF]. • If you do not press any buttons for 60 seconds, the handset will exit programming mode. • If the handset has lost communication with the base unit, the handset beeps 3 times and "No link to base. Place on cradle and try again." is displayed. • If [ ], [ ] or any other buttons except [MUTE] and [OFF] is pressed while the handset is on the base unit, the handset beeps 3 times and "Please lift up and try again." is displayed. Lift the handset and press the button again. Function Menu Table You can use the following functions to customize your unit. See the corresponding pages for function details. • After pressing [MENU], you can also program menu items by direct commands ([0] to [9]) instead of using the soft keys (p. 52). Main menu Ringer setting Message play p. 42 Date and time p. 13 Voice enhancer p. 16 Caller IQ Intercom p. 37 Initial setting Sub-menu I Ringer volume p. 18 Ringer tone p. 19 * View Info.? p. 60 Get new Info.? p. 59 Turn CIQ off? p. 57 LCD contrast p. 17 Auto talk p. 17 Caller ID edit p. 30 Set tel line Set answering Change language p. 14 Sub-menu II * "Activate CIQ?" is displayed before you subscribe to openLCR service. "Turn CIQ on?" is displayed when Caller IQ is set to off (p. 57). Set dial mode p. 15 Set flash time p. 39 Set line mode p. 15 Number of rings p. 22 Recording time p. 21 Remote code p. 45 12