Panasonic KX-TG2226WV 2.4 Ghz Digital - Page 37

Intercom Cordless Telephone > > Handset Base Unit A 2-way intercom can be set up between the base unit and the handset. Paging the base unit from the handset 1 Handset: Press [MENU]. 2 Handset: Scroll to "Intercom" by pressing [ ] or [ ], then press Select. 3 Base unit: When the other party's voice is heard after the beeps, answer using the MIC. • The IN USE/CHARGE indicator lights. 4 To disconnect the intercom, press [OFF] on the handset. OR Press [LOCATOR/INTERCOM] on the base unit. • The IN USE/CHARGE indicator goes out. Paging the handset from the base unit (Handset locator) Using this feature, you can also locate the misplaced handset. 1 Base unit: Press [LOCATOR/INTERCOM]. • The handset beeps for 1 minute and displays "Paging". • The IN USE/CHARGE indicator flashes. • To stop paging, press [LOCATOR/INTERCOM] on the base unit. 2 Handset: Press Intercom to answer. • The handset displays "Intercom". 3 Base unit: Talk into the MIC. 4 To disconnect the intercom, press [OFF] on the handset. OR Press [LOCATOR/INTERCOM] on the base unit. • The IN USE/CHARGE indicator goes out. • If you do not want to answer the page in step 2, press [OFF] to stop paging. > During an intercom call: • If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing VOL. [ ]. • If noise interferes with the conversation, press CH while "CH" is shown on the handset display. The unit selects a clearer channel. • If an incoming call is being received, the intercom call stops and the unit starts to ring. To answer, press [ ] or [ ]. For assistance, please call: 1-800-211-PANA(7262) 37