Panasonic KX-TG2226WV 2.4 Ghz Digital - Page 53
Troubleshooting
UPC - 037988473908
View all Panasonic KX-TG2226WV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Troubleshooting Cordless Telephone Problem Cause & Remedy "No link to base. Place on cradle and try again." is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset and/or base unit does not ring. The handset display is blank. You cannot program function items. While programming or searching, the unit starts to ring and stops the program/search. You cannot make a call with the handset. You cannot redial. • You are too far from the base unit. Walk closer and try again. • Place the handset on the base unit and try again. • Plug in the AC adaptor. • Raise the base unit antenna. • Move the handset and the base unit away from other electrical appliances (p. 3). • Walk closer to the base unit. • Raise the base unit antenna. • Select a clearer channel (p. 24, 37). • The ringer volume is set to OFF. Set to HIGH, MEDIUM or LOW (p. 18). • When the handset is on the base unit, the handset does not ring. Only the base unit rings when receiving a call. • Charge the battery fully (p. 9). • Programming is not possible while the unit is being used. • Do not pause for over 60 seconds while programming. • Walk closer to the base unit. • A call is coming in. To answer the call, press [ ] or [ ]. Start again from the beginning after hanging up. • Your handset is in remote operation mode (p. 42). Exit by pressing [OFF]. • If the last number dialed was more than 32 digits long, the number will not be redialed correctly. Useful Information For assistance, please call: 1-800-211-PANA(7262) 53