Panasonic KX-TG2632 2.4ghz Telephone W/cid - Page 32

Programming Feature Ring count Ringer tone (Handset)*5 Ringer volume (Handset) Set dial mode Set flash time*6 Set line mode*7 Time adjustment*8 (Caller ID subscribers only) Voice enhancer Feature code {0}{6}{1} {1}{2} {1}{1} {0}{5}{1} {0}{5}{2} {0}{5}{3} {0}{9} {5} Setting code System setting {2}-{7}: 2-7 rings r {0}: Toll saver {1}-{3}: Tone -3 - {4}-{7}: Melody 1-4 {1}: Low {2}: Medium - {3}: {0}: Off {1}: Pulse {2}: r (page 17) {1}: {2}: 600ms r {3}: 400ms {4}: 300ms {5}: 250ms {6}: 110ms {7}: 100ms {8}: 90ms {1}: A {2}: r {1}: r {0}: Manual {1}: On {0}: - *1 If you subscribe to Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *2 KX-TG2632 *3 This tone lets you know when you receive a call while you are on an intercom call. If you select "On", the tone sounds repeatedly for as long as the line rings. If you select "2", the tone only sounds 2 times. *4 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. *5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *6 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at "700ms" unless pressing {Flash} fails to pick up the call waiting call. *7 Generally, the line mode setting should not be adjusted. If "Line in use" is not displayed when another phone connected to the same line is in use, you need to change the line mode to "A". *8 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first. 32 For assistance, please visit http://www.panasonic.com/phonehelp