Panasonic KX-TG2632 2.4ghz Telephone W/cid - Page 37

Answering System Remote operation Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The unit's voice guidance prompts you to press certain dial keys to perform different operations. Important: L In order to operate the answering system remotely, you must first set a remote code (page 38). This code must be entered each time you operate the answering system remotely. Using the answering system remotely 1 Dial your phone number from a touch tone phone. 2 After the greeting message starts, enter your remote code (page 38). L The unit plays back new messages. L After playing back new messages, the voice guidance starts. 3 Follow the voice guidance as necessary. 4 When finished, hang up. Note: L You can ignore the voice guidance and control the unit using remote commands (page 37). Voice guidance During remote operation, the unit's voice guidance prompts you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order: - Play back all messages - Play back new messages - Record a message - Erase all messages Note: L If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. L If less than 3 minutes of recording time is available, the unit announces the remaining recording time after the last message is played back. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key Remote command {1} Repeat message (during playback)*1 {2} Skip message (during playback) {4} Play new messages {5} Play all messages {9} Stop playback*2 {0} Turn answering system off For assistance, please visit http://www.panasonic.com/phonehelp 37