Panasonic KXTGA542M 5.8g Nxpd Tot 1 Hs - Page 52

Answering System Features Answering system settings Remote code A remote code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. Store any 2-digit number (00-99). The default setting is "11". 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Set answering" by pressing {V} or {^}, then press {>}. 4 Scroll to "Remote code" by pressing {V} or {^}, then press {>}. 5 Select the desired remote code by entering a 2-digit number (00-99). 6 Press {Save}, then press {OFF}. Note: L To confirm the remote code, repeat steps 1 to 4. Press {OFF} when finished. Ring count You can change the number of times the phone rings before the unit answers calls. You can select "2", "3", "4" (default), "5", "6", "7", or "Toll saver". "Toll saver": The unit answers on the 2nd ring when new messages have been recorded, and on the 4th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 50), you will know that there are no messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Set answering" by pressing {V} or {^}, then press {>}. 4 Scroll to "Ring count" by pressing {V} or {^}, then press {>}. 5 Press {V} or {^} repeatedly to select the desired setting. L You can also select the ring count by pressing {0} ("Toll saver"), or {2} to {7}. 6 Press {Save}, then press {OFF}. 52 For assistance, please call 1-800-211-PANA (7262).