Panasonic PVD4763S PVD4763S User Guide - Page 16
Initial Setup For Basic Connections (ready To Play
View all Panasonic PVD4763S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Initial Setup for Basic Connections (Ready to Play) Before doing Initial Setup 1 Turn TV on. 2 See connections a RF Coaxial Cable Connection and b AV Cable Connection on page 12. Set TV to channel 3. Set TV to VIDEO. 3 [DECK ➛ TV] • Go to "Initial Setup (Ready to Play)." (See below.) [Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV] • Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone. • If you use a DSS Receiver, it must be turned off. Initial Setup (Ready to Play) 1 Press VCR on remote for VCR mode. 2 Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and clock set starts. • If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try switching it to channel 4. • To change VCR's output channel, please refer to "VCR's Output Channel" on page 19. Plugging the AC Power Plug into an AC outlet CH AUTO SET PROCEEDING CANCEL : STOP AUTO CLOCK SET PROCEEDING Notes • Function buttons are inoperative during Initial Setup. • To remove a cassette during Auto Set, press EJECT on the remote or STOP/EJECT twice on the DECK. In this case, settings must be made manually. (See p. 18.) • Depending on conditions, Auto Clock Set may take longer than 30 minutes. If so, press STOP to stop setup and perform settings manually. (See p. 18.) CANCEL : STOP Continued on next page... 16 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]