Panasonic PVD4763S PVD4763S User Guide - Page 30

Tape Operation Search System For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings. Index Search Program End Search 1 INDEX SEARCH ENTER INDEX NUMBER :1 USING 1- 9 KEYS FORWARD SEARCH :FF REVERSE SEARCH :REW NEXT :SEARCH EXIT :STOP 2 INDEX SEARCH FORWARD SEARCH : FF REVERSE SEARCH : REW Press SEARCH* to display SEARCH in Stop or Play mode, and then press NUMBER keys to select recording number. • To calculate number, see below. Press FF/SLOW+ or REW/SLOW- on the remote to start search. Play begins at search end. To search forward or back 1 index, press FF/SLOW+ or REW/SLOW- on the remote while screen left is displayed (10 sec.). • To cancel, press PLAY or STOP. Locates end point of recording for continuity. 1 Press SEARCH twice to display SEARCH in Stop or Play mode. 2 PROGRAM END SEARCH SEARCH START : FF EXIT :SEARCH Press FF/SLOW+ on the remote to start PROGRAM END SEARCH. • To cancel, press PLAY or STOP. INDEX INDEX Examples of Program End Search. Fig. 1 Program 1 the current tape position Press SEARCH button FF Program 2 or BLANK End Point Fig. 2 INDEX Program 1 BLANK Program 2 the current tape position Press SEARCH button FF BLANK End Point To Calculate Index Number Example 1: To go to rec. 2 from rec. 4, enter 3 and press REW. INDEX Fig. 3 the current tape position Press SEARCH button Program 1 BLANK FF End Point 1 2 3 45 6 7 Program 2 If search exceeds a few seconds in BLANK area. Example 2: To go to rec. 6 from rec. 2, enter 4 and press FF. 1 2 3 45 6 7 Upon locating end point, ➛ search continues 7 sec. past end point, ➛ tape rewinds to 10 sec. before end point, ➛ tape plays to end point and stops. NOTE: indicates start points of each recording. Note Note • If Index Search is started very close to an index mark, that index mark may not be counted in the search. • If Program End Search is started very close to an index mark, that mark may be skipped over. 30 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]