Panasonic PVD4763S PVD4763S User Guide - Page 20

Playback/ Record on a Tape Ready Checklist All connections are made. (pp. 12 ~ 15) TV and DECK are plugged in. TV is on and tuned to CH 3, 4, or VIDEO. Remote is in VCR mode. (Press VCR.) EJECT VCR Playback a Tape 1 Insert a tape. • DECK power comes on. If Auto VCR/TV (see p. 32) is set to "OFF," press VCR/TV on the remote to be VCR mode. REW/SLOWVCR/TV STOP DVD PLAY FF/SLOW+ PAUSE/ STILL 2 Press PLAY* to play a tape. • If tape has no rec. tab (p. 6), auto play begins. Special Features During Play Forward/Reverse Scene Search ➛ Press FF/SLOW+ or REW/SLOW-. ➛ Press PLAY to release. After search has begun, each additional press of FF or REW changes speed as shown below. [SLP] : Approx. 21X ↔ Approx. 9X [LP] : Approx. 9X ↔ Approx. 7X [SP] : Approx. 7X ↔ Approx. 3X If at 21X, 9X, or 7X speed the picture is interrupted, change speed to 9X, 7X, or 3X. Notes • Picture interruption may occur with some TVs. • FF and REW search speed may vary depending on current tape position. Still (Freeze) Picture ➛ Press PAUSE/STILL. ➛ Press PLAY to release. Frame by Frame Picture ➛ Press PAUSE/STILL in Still mode. ➛ Press PLAY to release. Slow Motion Picture ➛ Press FF/SLOW+ (increase speed) or REW/SLOW- (decrease speed) in Still mode. ➛ Press PLAY to release. CH / REC SPEED Notes • These features work best in SP or SLP mode. • The sound will be muted. • To reduce picture noise, see "Manual Tracking Control" on page 4. • After DECK is in Still or Slow mode for 3 minutes, it will switch to Stop mode automatically to protect the tape and the video head. Playback using DECK buttons 2 Press PLAY. 1 Insert a tape. 3 Press STOP to stop a tape. Press REW/SLOW- or FF/SLOW+ in Stop mode to rewind or fast forward a tape. Press EJECT on remote, or STOP/EJECT on DECK to eject a tape. Multi Function Display Press STOP/EJECT to stop and/ or eject a tape. 20 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]