Panasonic PVD4763S PVD4763S User Guide - Page 56

Output Balance Setup, Delay Time Setup, Do steps 1~2 of Speaker Output Setup

Page 56 highlights

Settings for DVD Operation (continued) Output Balance Setup Adjust the volume level output from the speakers. To adjust, play a disc or set the "TEST SIGNAL" (p.57) to ON. Then adjust while confirming the volume. (Even if "OFF" or "NONE" is set in "SPEAKER SIZE," the speaker OUTPUT BALANCE can still be set.) 1 Do steps 1~2 of "Speaker Output Setup" on page 55. 2 OUTPUT BALANCE CENTER SURROUND(R) SURROUND(L) SUBWOOFER TEST SIGNAL : 0dB : 0dB : 0dB : 0dB : OFF SELECT SET END : : SET : ACTION Press to select "OUTPUT BALANCE," and press SET to display OUTPUT BALANCE screen. Press to select an item, and press SET repeatedly. (See below table.) Menu item CENTER SURROUND(R) SURROUND(L) SUBWOOFER Setting -6dB ~ +6dB 0dB(factory preset) Remark Adjust so that the center speaker volume is virtually the same level (-6dB ~ +6dB) as the front speakers. Adjust so that the surround speaker(R) volume is virtually the same level (-6dB ~ +6dB) as the front speakers. Adjust so that the surround speaker(L) volume is virtually the same level (-6dB ~ +6dB) as the front speakers. Adjust so that the subwoofer speaker volume is optimum. However, because no test sound will come from the subwoofer, play a disc to confirm, then adjust. TEST SIGNAL : Switch test signal used for OUTPUT BALANCE setting to "OFF" or "FRONT(L)".... ➡ See page 57. 3 Press ACTION four times to exit. Delay Time Setup To enjoy 5.1 CH sound, it is ideal to place all speakers, except the subwoofer, in a circular arrangement. (See p. 57.) If this is not possible, setting Delay Time gives the sound output a delayed effect which gives you the illusion of the ideal listening position. (See right.) 1 Do steps 1~2 of "Speaker Output Setup" on page 55. [See p.57.] •, : Delay time as 0ms (Factory prest) • , < : Find the distance B1, C1 in the table (below) and change to the recommended setting. B1 Center speaker 2 Press to select "DELAY TIME," and press SET to display DELAY TIME screen. Press to select an item, and press SET repeatedly. (See below.) Distance B1 Approx. 50 cm (11/2 feet) Approx. 100 cm (3 feet) Approx. 150 cm (5 feet) Approx. 200 cm (6 feet) Setting 1.3 ms 2.6 ms 3.9 ms 5.3 ms Menu item Setting Remark 0ms 1ms 2ms 3ms 4ms 5ms CENTER Setting a delay effect. 0ms 5ms 10ms 15ms 20ms 0ms(Factory preset) SURROUND C1 Surround speaker Distance C1 Approx. 200 cm (6 feet) Setting 5.3 ms 3 Press ACTION three times to exit. Approx. 400 cm (12 feet) Approx. 600 cm (18 feet) 10.6 ms 15.9 ms 56 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

56
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Output Balance Setup
1
Adjust the volume level output from the speakers. To adjust, play a disc or set the “TEST SIGNAL”
(p.57) to ON. Then adjust while confirming the volume. (Even if “OFF” or "NONE" is set in “SPEAKER
SIZE,” the speaker OUTPUT BALANCE can still be set.)
2
Settings for DVD Operation (continued)
Delay Time Setup
1
To enjoy 5.1 CH sound, it is ideal to place all
speakers, except the subwoofer, in a circular
arrangement. (See <Speaker Position> p. 57.)
If this is not possible, setting Delay Time gives the
sound output a delayed effect which gives you the
illusion of the ideal listening position. (See right.)
2
3
Press
ACTION
three times to exit.
Press
to select “OUTPUT BALANCE,” and
press
SET
to display OUTPUT BALANCE screen.
Press
to select an item, and
press
SET
repeatedly.
(See below table.)
Press
to select “DELAY TIME,” and
press
SET
to display DELAY TIME screen.
Press
to select an item, and
press
SET
repeatedly. (See below.)
OUTPUT
BALANCE
SELECT
:
SET
: SET
END
: ACTION
CENTER
CENTER
: 0dB
: 0dB
SURROUND(R)
: 0dB
SURROUND(L)
: 0dB
SUBWOOFER
: 0dB
TEST SIGNAL
: OFF
Menu item
SURROUND
CENTER
Remark
Setting
0ms
1ms
2ms
3ms
4ms
5ms
0ms
(Factory preset)
Setting a delay effect.
0ms
5ms
10ms
15ms
20ms
Distance
Setting
B1
Approx. 50 cm (1
feet)
1
/2
Approx. 100 cm (3 feet)
1.3 ms
2.6 ms
3.9 ms
5.3 ms
Approx. 150 cm (5 feet)
Approx. 200 cm (6 feet)
C1
Distance
Setting
Approx. 200 cm (6 feet)
Approx. 400 cm (12 feet)
5.3 ms
10.6 ms
15.9 ms
Approx. 600 cm (18 feet)
B1
Center speaker
C1
Surround speaker
,
: Delay time as 0ms
(Factory prest)
,
<
:
Find the distance
B1
,
C1
in the
table (below) and change to
the recommended setting.
[See <Speaker Position> p.57.]
3
Press
ACTION
four times to exit.
Menu item
SUBWOOFER
SURROUND(L)
SURROUND(R)
CENTER
Remark
Setting
-6dB
~
+6dB
0dB
(factory preset)
Adjust so that the center speaker volume is virtually the same
level (-6dB ~ +6dB) as the front speakers.
Adjust so that the surround speaker(R) volume is virtually
the same level (-6dB ~ +6dB) as the front speakers.
Adjust so that the surround speaker(L) volume is virtually
the same level (-6dB ~ +6dB) as the front speakers.
Adjust so that the subwoofer speaker volume is optimum.
However, because no test sound will come from the
subwoofer, play a disc to confirm, then adjust.
TEST SIGNAL : Switch test signal used for OUTPUT BALANCE setting to “OFF” or “FRONT(L)”
....
See page 57.
Do steps 1~2 of “Speaker Output Setup” on page 55.
Do steps 1~2 of “Speaker Output
Setup” on page 55.