Panasonic SADP1 SADP1 User Guide - Page 37
Reference, Sound, Picture, Listening to the radio
View all Panasonic SADP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Sound No sound. ≥Check the connections. 7 Distorted sound. ≥Turn the volume up. - ≥Turn muting off. 28 ≥Turn Advanced surround off if it causes distortion. 19 ≥Switch off the unit, determine and correct the cause, then switch the unit on. - Causes include: -Shorting (bare wires touching) of positive and negative speaker wires. -Using speakers with an impedance lower than that rated for this unit. -Straining of the speakers through excessive volume or power. -Using the unit in a hot environment without proper ventilation. Piercing noise comes from the ≥If you have connected this unit to other equipment through the OPTICAL OUT terminal, ensure 31 speakers. you have selected the correct settings for "Dolby Digital" and "DTS Digital Surround" in the SETUP menus' Audio menu. Effects do not work. ≥Dialogue enhancer and Advanced surround do not work when the unit is outputting bitstream - signals. ≥Advanced surround does not work if you have changed the play speed. 23 Picture Picture distorted. ≥Some distortion is normal during SEARCH. - No picture. ≥Check the connection. 8 ≥Make sure the television is on. - ≥Ensure the television's video input setting (e.g., VIDEO 1) is correct. - The picture shown on the ≥Go to Video in the SETUP menus, and change "TV Aspect" to suit your television. 30 television is not normal. ≥Use the television to change the aspect to the correct one. - (The sides of the picture are cut If your television cannot change the aspect when input is progressive, try changing 4:3 25 off, the picture is stretched horizontally, or black bands Aspect with the on-screen menu icons. ≥Ensure that the unit is connected directly to the television, and is not connected through a video - appear at the top and bottom of cassette recorder. the screen.) ≥Connect to the component video (480P) input terminals on a television compatible with this 8 unit's copy guard system. You cannot view progressive video if your television is not compatible. ≥Change the size with the variable zoom function. 18 ≥The images on PAL system DVD-Audio are compressed for display. They may also appear - vertically stretched. There is ghosting when ≥Change "Video output mode" to "480I" so "PROGRESSIVE" on the display goes out. This 25 progressive output is on. problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output. Picture quality is poor. ≥Check the settings in the On-Screen Menu Icons' Picture Menu. 25 The picture on the television ≥Mobile telephone chargers can cause some disturbance. - disappears or stripes appear on ≥The location and orientation of the antenna are incorrect. If you are using an indoor antenna, 32 the screen. change to an outdoor antenna. ≥The television antenna wire is too close to the unit. Separate the antenna wire of the television - from the unit. Menus not displayed correctly. ≥Change the zoom ratio to "k1.00". 18 ≥With the on-screen icon menus, change "Subtitle Position" to "0" or change "4:3 Aspect" to 25 "Normal". Listening to the radio Noise is heard. ≥Adjust the position of the FM or AM antenna. - "ST" flickers or doesn't light. ≥Use an outdoor antenna. 32 Sound is distorted. A beat sound is heard. ≥Turn the television off or separate it from the unit. - A low hum is heard during AM ≥Separate the antenna from other cables and cords. - broadcasts. Reference RQT6815 37