Panasonic SCHTB550 SCHTB550 User Guide - Page 13
Connect the speaker cables., Drive a screw into the wall., Fit the speakers securely onto the screws
View all Panasonic SCHTB550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connect the speaker cables. ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. Push 1 Insert the wire fully. r: White s: Blue line 2 Press into the groove. Drive a screw into the wall. ≥ Use the measurements indicated below to identify the screwing positions on the wall. ≥ Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the speaker. ≥ The position in the wall where the screw is to be attached as well as the screw should be capable of supporting over 33 kg (72.8 lbs). ≥ Keep the screws out of reach of children to prevent swallowing. A At least 30 mm (1 3/16q) B ‰4.0 mm (5/32q) C ‰7.0 mm to ‰9.4 mm (9/32q to 3/8q) D Wall or pillar E 5.5 mm to 6.5 mm (7/32q to 1/4q) F Front speaker (Rear view) G 102 mm (4 1/32q) H 37 mm (1 15/32q) I Wall mounting hole Fit the speaker(s) securely onto the screw(s). ≥ Place the speaker that is connected with the speaker cable with a red connector on the observers' right, and connect with the speaker cable with a white connector on the observers' left. Getting started White J WHITE: Left speaker channel (L) DO Red K RED: Right speaker channel (R) DO NOT ≥ Move the speaker so that the screw is in this position. ≥ In this position, the speaker will likely fall if moved to the left or right. 13 RQT9660