Panasonic SCHTB550 SCHTB550 User Guide - Page 17
Horizontal placement
View all Panasonic SCHTB550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connect the speaker cables. ≥ Insert the wire fully, taking care not to insert beyond the wire insulation. Insert the wire fully. r: White s: Blue line Back of the base Getting started Push Press into the groove. ≥ Place the speaker that is connected with the speaker cable with a red connector on the observers' right, and connect with the speaker cable with a white connector on the observers' left. Additional speaker fall prevention measures To prevent the speakers from falling, it is recommended, as an additional protection measure, to attach the speakers to the wall or table with a fall prevention cord (hereafter "cord"). ≥ Consultation with a qualified installation specialist concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support is recommended (> 11, 13). Improper attachment may result in damage to the wall and speakers, and personal injury. ≥ Use a cord that is capable of supporting over 10 kg (22.05 lbs) (with a diameter of about 1.5 mm (1/16q)). ≥ Keep the screws out of reach of children to prevent swallowing. ≥ Make sure that the slack of the cord is minimal. When attaching the speakers to a wall Horizontal placement Vertical placement A Cord§ B Screw eye C Wall D Wall-mounted speakers § If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 10 mm (13/32q) apart from the tip, at an angle of 45o (as illustrated above). 17 RQT9660