Panasonic WJ-HD616/1000 Installation Guide - Page 100
Maintenance port
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
[IP address] When "Off" is selected for "DHCP", enter an IP address. Enter 4 units from the decimal numbers (0-255). Default: 192.168.0.250 [Subnet mask] Enter a subnet mask according to the network environment when "Off" is selected for "DHCP". Enter 4 units from the decimal numbers (0-255). Default: 255.255.255.0 [Default gateway] Enter the IP address of the gateway according to the network environment when "Off" is selected for "DHCP". Enter 4 units from the decimal numbers (0-255). Default: 192.168.0.1 [Line speed] Specify the line speed for data transmission. Auto: Line speed will be applied automatically. 10M-Half: 10 Mbps half-duplex 10M-Full: 10 Mbps full-duplex 100M-Half: 100 Mbps half-duplex 100M-Full: 100 Mbps full-duplex Default: Auto ■ Maintenance port The setting for the maintenance port behind the front cover of the recorder is configured. This setting is required to maintain and support the recorder from a PC connected via a network using the maintenance port. [IP address] When "Off" is selected for "DHCP", enter an IP address. Enter 4 units from the decimal numbers (0-255). Default: 192.168.2.250 [Subnet mask] Enter a subnet mask according to the network environment when "Off" is selected for "DHCP". Enter 4 units from the decimal numbers (0-255). Default: 255.255.255.0 Important: • The settings of "Network Port" and "Maintenance Port" should be on a different subnet. [Line speed] Displays the line speed for data transmission. It is impossible to change the setting value. 100