Panasonic WJ-HD616/1000 Installation Guide - Page 75
Con the event action at a VMD occurrence [VMD]
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Configure the event action at a VMD occurrence [VMD] Select the [VMD] tab on the "Event" page. (☞ Page 60) The settings relating to event actions to be taken at a VMD (☞ Operating Instructions (PDF)) occurrence can be configured on this tab. [Operation Mode] Select the settings for the operation mode. Refer to the operating instructions (PDF) for further information about the operation mode. ADM (Activity Detection Mode): Performs only recording and writing an event log at an event occurrence. Other event actions will not be performed. ALM (Alarm Mode): Performs every event action according to the settings. Off: Performs only writing an event log. Other event actions will not be performed. Configure the following settings for each camera channel (1 to 16). [Rec. cam.] Select a camera channel (1 to 16) used for recording. When "Off" is selected, recording will not be performed. [Preset] Select a preset position (1 to 256) to which the camera will move at a VMD detection. When the preset positions of two or more cameras have been selected on the advanced setup page is displayed and it is impossible to select the values. [Output terminal] Select a terminal (TRM1 to TRM16) to output the alarm signal. 75