Panasonic WJ-HD616/1000 Installation Guide - Page 105
Con the settings relating to network transmission [Transmission]
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Configure the settings relating to network transmission [Transmission] Select the [Transmission] tab on the "Network" page. (☞ Page 60) The settings relating to the resolution and rate to transmit live images to a PC via a network can also be configured on this tab. [Live video resolution] Select the resolution for live images from the following. REC resolution: Live images are transmitted with the resolution applied at the time of recording. QVGA: Live images are transmitted in the QVGA size. Default: REC resolution: [Live video rate(rec resolution)] Select the image transmission rate of live images (activated when recording is not performed) when "REC resolution" is selected for "Live video resolution". During recording, recording rate is activated for live image transmission. Off/ 1.25ips/ 2.5ips/ 3.75ips/ 7.5ips/ 15ips (Only for HD716K) Default: 7.5ips [Live video quality(rec resolution)] Select the image quality of live images (activated when recording is not performed) when "REC resolution" is selected for "Live video resolution". During recording, recording image quality is activated for live image transmission. XF (Extra Fine): Extra quality SF (Super Fine): Super high quality FQ (Fine): High quality NQ (Normal): Standard quality EX (Extended): Low quality (for long recording) Default: FQ [Live video rate(QVGA)] Select the transmission bit rate when "QVGA" is selected for "Live video resolution". 128Kbps/192Kbps/256Kbps/384Kbps*/512Kbps* * Only for HD716K Default: 256Kbps [Bandwidth control] Select the maximum transmission rate for data to be transmitted from the following. Unlimited/512Kbps/1 024Kbps/2Mbps/3Mbps/5Mbps/ 8Mbps Default: Unlimited Note: • Regardless of the setting for "Live video resolution", when images are displayed on a multiscreen (4-split/ 9-split/16-split screen) or with the sequential display, "QVGA" is activated for resolution, and the setting for "Live video rate (QVGA)" is activated when image is transmitted. • When image is displayed on a single screen, the setting for "Live video resolution" is activated when image is transmitted. • The settings for "Live video rate(rec resolution)", "Live video quality(rec resolution)" and "Live video rate(QVGA)" are applied to each screen segment. Example: When "128Kbps" is selected for "Live video rate (QVGA)" while images are being displayed on a 4-split screen, the whole transmission rate is 512 Kbps. • Select the setting for "Bandwidth control" so that the value is greater than the total rate required for network transmission. When the setting value is less than the total transmission rate, image data may be destroyed during transmission. Example: When "QVGA" is selected for "Live video resolution" and "128Kbps" is selected for "Live video rate (QVGA)" while 4 PCs displaying a single screen are accessing the recorder simultaneously, select the value greater than "512Kbps" for "Bandwidth control". When "REC resolution" is selected for "Live video resolution", it is recommended to set "Unlimited" for "Bandwidth control" to prevent the images from destruction due to change in transmission rate caused by the recording setting. When images are destroyed even when "Unlimited" is selected for "Bandwidth control", select a lower value for image quality or recording rate. 105