Pentax 19033 Operation Manual - Page 105

Saving the Settings (Memory) The Memory function is for saving the current camera settings when the camera is turned off. For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O (On) or P (Off) in the Memory function are shown in the table below. (Items not listed here will be saved in the selected settings when the camera is turned off.) If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P (Off), the settings will be reset to the defaults when the camera is turned off. The table below also 4 shows whether the Memory default setting for each item is on or off. Taking Pictures Item Flash Mode Drive Mode Focus Mode Zoom Position MF Position White Balance Sensitivity EV Compensation AE Metering Digital Zoom DISPLAY File # Description The flash mode set with the four-way controller (4) (p.87) Default Setting O The drive mode set with the four-way controller (2) (p.76, p.77, p.78) P The focus mode set with the four-way controller (5) (p.85) P The zoom position set with the Zoom/w/x button (p.80) P The manual focus position set with the four-way controller (23) (p.86) P The [White Balance] setting on the [A Rec.Mode] menu (p.92) P The [Sensitivity] setting on the [A Rec.Mode] menu (p.96) P The [EV Compensation] setting on the [A Rec.Mode] menu (p.82) P The [AE Metering] setting on the [A Rec.Mode] menu (p.94) P The [Digital Zoom] setting on the [A Rec.Mode] menu (p.81) O The LCD monitor information display mode set with the 4/W button (p.83, p.118) P If a new SD Memory Card is inserted when On has been selected, file numbers are assigned sequentially. O 103