Pfaff 75 Owner's Manual - Page 11
the vertical
View all Pfaff 75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
DR 8S9 Winding the Bobbin Disengage the sewing mechanism and rase the spool pins to the vertical position. Place a spool of thread on one of the spool pins and a bobbin on the bobbin winder spindle, making sure that the key at its base enters the slot in the bobbin, Pass the thread through the righthand thread guide, down and around the thread retainer stud, and up to the bobbin. Wind a few turns of thread on the bobbin in clockwise direction. Push the bobbin to the right and start the machine. The bobbin winder will stop automatically when the bobbin is full. Press the bob bin to the left and remove it from the spindle. Then tighten the stop motion knob again. The amount of thread to be wound on the bobbin is regulated by turning the adjusting button accordingly. Set the button at position A for the minimum amount of thread, or at position B for the maximum. The button can be turned to the desired position after loosening its set screw with a screwdriver. 11 AB \, ./ 0 (7 i