Pfaff 75 Owner's Manual - Page 46

Turn sewing foot thumb screw b to the left and take out the sewing foot. Slip on cording foot and tighten screw b securely. it is best to turn out screw b completely if you want to slip on a cording foot with the guide attached. Thread Size Pin tucks and narrow cording are made with a No. 50 embrcidery thread, wider cording with sewing silk in the needle end on the bobbin. Set the machine for a medium stitch length (about 4). Upper Threading Place a spool of thread on each of the two as illustrated on page 17. Lead one thread and front tension discs of upper tension 3. the hole at its end. Pull threads into slot 5 spool pins. Pass both between the rear and Raise take-up lever 4 thread ends through both thread retainer openings 2. center tension discs, and the other between the center to its highest position and pass both threads through and thread each needle from front to back. The bobbin thread is drawn up as instructed on page 18. To do this, hold both needle threads in your left hand. Thread Tension Slightly increase the bobbin thread tension, and increase or needle thread tension depending on the type of fabric used, has been set correctly, the bobbin thread should appear as decrease the If the tension a faint zigzag line on the other sde. Filled Cording If you want to make cording in filmy fabrics or render prominent Pfsff recommends that you insert a filler your cord, cording more Its thickness depends on the cording size you want. thSnohoewpeleeeidnnelgignendgalaawnoicnafdayttethhbdteehoebifnfbrifeilrnlfeeerroetanhrctamroremoradfcdactpbhae,aepncdckoalsvon)au.sdlenPdpntueahelrlseissdttlhhceteehapehcfoiofallilrenledldreifnr pcg(cosloaerfcrdeodeofitlftolhr,ro(ewtmoonabgrabedpltelahltgoeihnwerroyw3uot2hgiut)rhh.rouLlttaghhaphyee. 46 DR 521