Pfaff coverstyle 4850 Owner's Manual - Page 17

Changing the needle, Turn off the electrical power, To remove, To insert

Get Pfaff coverstyle 4850 PDF manuals and user guides View all Pfaff coverstyle 4850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Changing the needle Turn off the electrical power To remove: Lower the presser foot and move the needle(s) to the highest position by turning the handwheel towards you. Push the needle inserting tool (from the accessory box 47) from below upward fully over the needle. Loosen the fastening screw of the needle (without removing it) with the Allen key (behind the swivel plate) and pull the needle down to remove. To insert: Insert the needle into hole E of the needle inserting tool, so that the flat needle shank K faces the flat side L of the inserting tool. Insert the needle fully into the holder and tighten the fastening screws. Remove the needle inserting tool. Overlock needles types EL X 705, cat. no. 2002 are required for this machine. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
13
Changing the needle
Turn off the electrical power
To remove:
Lower the presser foot and move
the needle(s) to the highest position by turning
the handwheel towards you. Push the needle
inserting tool (from the accessory box
47
) from
below upward fully over the needle. Loosen the
fastening screw of the needle (without remo-
ving it) with the Allen key (behind the swivel
plate) and pull the needle down to remove.
To insert:
Insert the needle into hole
E
of the
needle inserting tool, so that the
fl
at needle
shank
K
faces the
fl
at side
L
of the inserting
tool. Insert the needle fully into the holder
and tighten the fastening screws. Remove the
needle inserting tool.
Overlock needles types
EL X 705, cat. no. 2002
are required for this machine.