Pfaff coverstyle 4850 Owner's Manual - Page 25
The lever returns automatically to its
View all Pfaff coverstyle 4850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Thread the thread guides, as shown in the diagram, in a sequence of 1 to 8. Some of the threads guides are marked with a violet square. Press lever A upward and hook the thread into slot B. Also refer to the drawing below. Note: The lever returns automatically to its position as soon as you start sewing. Thread from the front through eye C of the two-thread chainstitch looper and the cover stitch looper (= threading point 10). Pull approximately 4" (10 cm) of thread through the looper and place it to the left under the presser foot. 21
21
Thread the thread guides, as shown in the
diagram, in a sequence of
1 to 8
. Some of the
threads guides are marked with a violet square.
Thread from the front through eye
C
of the
two-thread chainstitch looper and the cover
stitch looper (= threading point 10).
Press lever
A
upward and hook the thread into
slot
B
. Also refer to the drawing below.
Note:
The lever returns automatically to its
position as soon as you start sewing.
Pull approximately 4” (10 cm) of thread
through the looper and place it to the left
under the presser foot.