Pfaff coverstyle 4850 Owner's Manual - Page 60
needle 3-thread assembly seam, Program 10
View all Pfaff coverstyle 4850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
2-needle 3-thread assembly seam Program 10 Note: The converter (see page 32) must be attached to sew the 2-needle 3-thread assembly seam. The lower needle thread (blue) is too loose. Set the blue thread tension to a higher value. The upper needle thread (green) is too loose. Set the green thread tension to a higher value. The lower looper thread (yellow) is too tight. Set the yellow thread tension to a lower value. 56
56
2-needle 3-thread assembly seam
Program 10
Note:
The converter (see page 32) must be at-
tached to sew the 2-needle 3-thread assembly
seam.
The
upper needle thread
(green) is too loose.
Set the green thread tension to a higher value.
The
lower needle thread
(blue) is too loose.
Set the blue thread tension to a higher value.
The
lower looper thread
(yellow) is too tight.
Set the yellow thread tension to a lower value.