Pfaff coverstyle 4850 Owner's Manual - Page 21
The lever returns automatically to its position
View all Pfaff coverstyle 4850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Thread through the thread guides 1 to 8, marked yellow. Press lever A downwards and hook the thread into guide B. Please also refer to the drawing below. Note: The lever returns automatically to its position as soon as you start sewing. Thread from the front through the eye of the lower overedge looper C (= threading point 10). Pull approximately 4" (10 cm) of thread through the looper and place it to the left under the presser foot. 17
17
Thread through the thread guides
1 to 8
,
marked yellow.
Thread from the front through the eye of the
lower overedge looper
C
(= threading point
10
).
Press lever
A
downwards and hook the thread
into guide
B
. Please also refer to the drawing
below.
Note:
The lever returns automatically to its position
as soon as you start sewing.
Pull approximately 4” (10 cm) of thread th-
rough the looper and place it to the left under
the presser foot.