Pfaff coverstyle 4850 Owner's Manual - Page 42

Adjusting the stitch length, Removing the needle plate, Inserting the needle plate

Get Pfaff coverstyle 4850 PDF manuals and user guides View all Pfaff coverstyle 4850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Adjusting the stitch length You can set the desired stitch length between 0.5 mm to 4.0 mm by turning the stitch length adjustment knob (42). Note: For the two thread chainstitch, the setting should be 3.0 or higher. Removing the needle plate Raise the presser foot and move the needle(s) to the highest position. Remove the presser foot and open the swivel plate. Press down the needle plate disengaging lever 26. The needle plate 11 is raised out of its mount. The needle plate can be removed to the left. Note: The machine should be unthreaded when removing the needle plate. Inserting the needle plate Place the needle plate to the rear on the guide pin (A) and press down at the front until you hear it click into place. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
38
Adjusting the stitch length
You can set the desired stitch length between
0.5 mm to 4.0 mm by turning the stitch length
adjustment knob
(42)
.
Note:
For the two thread chainstitch, the setting
should be 3.0 or higher.
Removing the needle plate
Raise the presser foot and move the needle(s)
to the highest position. Remove the presser
foot and open the swivel plate. Press down the
needle plate disengaging lever
26
. The needle
plate
11
is raised out of its mount. The needle
plate can be removed to the left.
Note:
The machine should be unthreaded when remo-
ving the needle plate.
Inserting the needle plate
Place the needle plate to the rear on the guide
pin
(A)
and press down at the front until you
hear it click into place.