Philips HDP1690 User manual - Page 12

2 Press the black latch locking. 3 Lift the lever blue retention. 2 3 4 Insert the new batteries into the battery compartment with the positive and negative poles as shown. Make sure the polarities(+ and -) are aligned correctly. 4 Notice Normally the batteries will last for around one year. If the remote control stops working, please replace the batteries. If the device is not used for a long time, take out the batteries. This will prevent leakage and possible damage to the remote control. The used batteries should be disposed of according to the recycling regulations of your country. Placing the USB receiver RF Remote Control (RF) Your remote control is recognized by the device with the supplied USB receiver connected to a rear USB port.". Notice Respect the direction of insertion, do not force any case! 1 Take the USB receiver and insert it into a USB port on the device. 5 Press the locking lever until you hear "CLICK" it tells you that the closure is correct. CLICK 5 6 Replace the battery cover in place and press down to close. 12 Philips · HDP16x0 & HDP16x0TV